zpool-iostat.8

ZPOOL-IOSTAT(8) System Manager's Manual ZPOOL-IOSTAT(8)

zpool-iostat — Display logical I/O statistics for the given ZFS storage pools/vdevs

zpool iostat [[[-c SCRIPT] [-lq]]|-rw] [-T u|d] [-ghHLnpPvy] [[pool...]|[pool vdev...]|[vdev...]] [interval [count]]

zpool iostat [[[-c SCRIPT] [-lq]]|-rw] [-T u|d] [-ghHLnpPvy] [[pool...]|[pool vdev...]|[vdev...]] [interval [count]]
Displays logical I/O statistics for the given pools/vdevs. Physical I/Os may be observed via iostat(1). If writes are located nearby, they may be merged into a single larger operation. Additional I/O may be generated depending on the level of vdev redundancy. To filter output, you may pass in a list of pools, a pool and list of vdevs in that pool, or a list of any vdevs from any pool. If no items are specified, statistics for every pool in the system are shown. When given an interval, the statistics are printed every interval seconds until ^C is pressed. If -n flag is specified the headers are displayed only once, otherwise they are displayed periodically. If count is specified, the command exits after count reports are printed. The first report printed is always the statistics since boot regardless of whether interval and count are passed. However, this behavior can be suppressed with the -y flag. Also note that the units of , , that are printed in the report are in base 1024. To get the raw values, use the -p flag.
[SCRIPT1[,SCRIPT2]...]
Run a script (or scripts) on each vdev and include the output as a new column in the zpool iostat output. Users can run any script found in their ~/.zpool.d directory or from the system /etc/zfs/zpool.d directory. Script names containing the slash (/) character are not allowed. The default search path can be overridden by setting the ZPOOL_SCRIPTS_PATH environment variable. A privileged user can run -c if they have the ZPOOL_SCRIPTS_AS_ROOT environment variable set. If a script requires the use of a privileged command, like smartctl(8), then it's recommended you allow the user access to it in /etc/sudoers or add the user to the /etc/sudoers.d/zfs file.

If -c is passed without a script name, it prints a list of all scripts. -c also sets verbose mode (-v).

Script output should be in the form of "name=value". The column name is set to "name" and the value is set to "value". Multiple lines can be used to output multiple columns. The first line of output not in the "name=value" format is displayed without a column title, and no more output after that is displayed. This can be useful for printing error messages. Blank or NULL values are printed as a '-' to make output awk-able.

The following environment variables are set before running each script:

Full path to the vdev
Underlying path to the vdev (/dev/sd*). For use with device mapper, multipath, or partitioned vdevs.
The sysfs path to the enclosure for the vdev (if any).
u|d
Display a time stamp. Specify u for a printed representation of the internal representation of time. See time(2). Specify d for standard date format. See date(1).
Display vdev GUIDs instead of the normal device names. These GUIDs can be used in place of device names for the zpool detach/offline/remove/replace commands.
Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space.
Display real paths for vdevs resolving all symbolic links. This can be used to look up the current block device name regardless of the /dev/disk/ path used to open it.
Print headers only once when passed
Display numbers in parsable (exact) values. Time values are in nanoseconds.
Display full paths for vdevs instead of only the last component of the path. This can be used in conjunction with the -L flag.
Print request size histograms for the leaf vdev's IO. This includes histograms of individual IOs (ind) and aggregate IOs (agg). These stats can be useful for observing how well IO aggregation is working. Note that TRIM IOs may exceed 16M, but will be counted as 16M.
Verbose statistics Reports usage statistics for individual vdevs within the pool, in addition to the pool-wide statistics.
Omit statistics since boot. Normally the first line of output reports the statistics since boot. This option suppresses that first line of output. interval
Display latency histograms:

total_wait: Total IO time (queuing + disk IO time). disk_wait: Disk IO time (time reading/writing the disk). syncq_wait: Amount of time IO spent in synchronous priority queues. Does not include disk time. asyncq_wait: Amount of time IO spent in asynchronous priority queues. Does not include disk time. scrub: Amount of time IO spent in scrub queue. Does not include disk time.

Include average latency statistics:

total_wait: Average total IO time (queuing + disk IO time). disk_wait: Average disk IO time (time reading/writing the disk). syncq_wait: Average amount of time IO spent in synchronous priority queues. Does not include disk time. asyncq_wait: Average amount of time IO spent in asynchronous priority queues. Does not include disk time. scrub: Average queuing time in scrub queue. Does not include disk time. trim: Average queuing time in trim queue. Does not include disk time.

Include active queue statistics. Each priority queue has both pending ( pend) and active ( activ) IOs. Pending IOs are waiting to be issued to the disk, and active IOs have been issued to disk and are waiting for completion. These stats are broken out by priority queue:

syncq_read/write: Current number of entries in synchronous priority queues. asyncq_read/write: Current number of entries in asynchronous priority queues. scrubq_read: Current number of entries in scrub queue. trimq_write: Current number of entries in trim queue.

All queue statistics are instantaneous measurements of the number of entries in the queues. If you specify an interval, the measurements will be sampled from the end of the interval.

zpool-list(8), zpool-status(8), iostat(1), smartctl(8)

August 9, 2019 Debian