Message ID: ZFS-8000-JQ

ZFS pool I/O failures






The ZFS pool has experienced currently unrecoverable I/O failures.

Automated Response:

No automated response will be taken.


Write I/Os cannot be serviced.

Suggested Action for System Administrator

The pool has experienced I/O failures. Since the ZFS pool property failmode is set to ‘continue’, read I/Os will continue to be serviced, but write I/Os are blocked. See the zpoolprops(8) manpage for more information on the failmode property. Manual intervention is required for write I/Os to be serviced. You can see which devices are affected by running zpool status -x:

# zpool status -x
  pool: test
 state: FAULTED
status: There are I/O failures.
action: Make sure the affected devices are connected, then run 'zpool clear'.
 scrub: none requested

        NAME        STATE     READ WRITE CKSUM
        test        FAULTED      0    13     0  insufficient replicas
          sda9      FAULTED      0     7     0  experienced I/O failures
          sdb9      ONLINE       0     0     0

errors: 1 data errors, use '-v' for a list

After you have made sure the affected devices are connected, run zpool clear to allow write I/O to the pool again:

# zpool clear test

If I/O failures continue to happen, then applications and commands for the pool may hang. At this point, a reboot may be necessary to allow I/O to the pool again.


The Message ID: ZFS-8000-JQ indicates that the pool has experienced I/O failures. Take the documented action to resolve the problem.